SSD Health Check 1.5
Posted : admin On 22.12.2020Check in on how much life is left in your SSD, find out if your SSD is hooked up to the suitable ports, and set in the correct modes to achieve high performance. SSD Tuner This feature allows you to fine-tune your SSD. SSD health depends on the amount of data you write to it. With some SSDs you can write up to 600TB of data before the product needs replacement. As an example, the Samsung 850 Pro line, built with 3D V-NAND technology, has the following TWP numbers: 256 GB: 150 TBW; 512 GB and 1 TB: 300 TBW; 2 TB: 450 TBW; 4 TB: 600 TBW. Samsung Magician is a similar SSD health checker tool that works with Samsung 950, 850, 840, 830, and 470 Series SSDs. It does Performance benchmarking to give you an idea of the performance. Well, for most SSD health check tools, they can be used to test the SSD transfer speed, measure SSD performance, optimize SSD, etc. Some of them even allow you to erase SSD securely. Given to that fact, you’d better read the software’s description carefully to check if it contains the feature you need. SSDReporter 1.5.0 – Health-check for solid-state drives. August 16, 2018 SSDReporter is an application that checks the health of your internal solid state drives (“SSD” aka “Flash Storage”).
The Drive health section displays the warning, the estimated remaining life, the available spare, and the device's temperature. You can check the values for each NVM SSD connected to the system using the management option. A typical health report on a solid state drive. Beyond the Self-test log, there are two values in the output to be examined: PowerOnHours - how many hours the drive has been powered on.
Solid States Drives or SSDs offer better performance as compared to traditional spinning hard disks. That is the reason it is now becoming popular and has already replaced regular hard disks in high-end laptops. If your system uses SSD, it will boot faster, app load time will be less you will experience better performance and less power consumption. But the performance of SSDs can decrease over time as they fill up. Especially when you have filed it up to 70%. If you use SSD drive and want to check SSD health and performance, there are several tools in the market. These tools help you in checking SSD health and help you in minimizing this performance slowdown.
Also see: Best SSD For Gaming
Software to Check SSD Health
Here is the list of best software programs to check SSD health.
1. Crystal Disk Info
Crystal Disk Info is one of the most popular tools to monitor SSD health status and temperature. It can also be used with other Hard Disk types. Once you have installed it, you can use it to monitor SSD performance in real-time while you are working on your system. You can keep an eye on Read / Write speed, read error rate, throughput performance and total Power-on time.
Download for: Windows (free)
2. Intel SSD Toolbox
Intel SSD Toolbox is also a good software to monitor SSD’s health, estimate drive life remaining and S.M.A.R.T. Attributes. This SSD health check tool scans the full SSD area to test the read and write functionality of an Intel SSD including Intel Optane SSDs as well as a data center. It also optimizes performance, updates the firmware on supported SSDs. It checks and tunes system settings for optimal performance and power efficiency. It also offers secure erase option.
Ssd Health Check 1.5 Hp
Download for: Windows MAC Linux (free)
3. Samsung Magician
Samsung Magician is a similar SSD health checker tool that works with Samsung 950, 850, 840, 830, and 470 Series SSDs. It does Performance benchmarking to give you an idea of the performance status of the SSD. You can check sequential and random read/write speeds. You can also check TBW and estimated the remaining lifespan of your SSD. It also checks Drive health and Total Bytes Written count. You can also use it to optimize your Samsung SSD with three different profiles. The Secure Erase allows to wipe out the SSD securely.
Download for: Windows (free)
4. Toshiba SSD Utility
Toshiba SSD Utility is for Toshiba Drives to manager OCZ SSDs. It avoids a real-time overview of system status, capacity, interface, health, etc. It offers SSD tuning with three modes. You can use this tool for Health monitoring, Firmware updating and Overprovisioning control. It also lets you tune the SSD for long-term life.
Download for: Windows MAC Linux (free)
5. Kingston SSD Manager
Kingston SSD Manager is also a nice application to monitor and manage various aspects of Kingston SSD. It lets you monitor your drive’s health, status, and disk usage. It also lets you update drive firmware and securely erase your SSD data. It is available on Windows platforms.
Download for: Windows (free)
6. SSD Life
SSD Life is a dedicated tool for SSDS to measure the lifespan of SSD. So, you know how long your SSD will last on your computer. It gives you an overview of SSD’s health and informs you about any critical defects. It also tells you how to optimize SSD. This tool works with most SSD manufacturers, so you can use it with almost all SSDs available in the market.
Download for: Windows (free trial)
7. SsdReady
SSD Ready is also windows only tool that tracks daily Writes and the total usage of your SSD. By checking your usage pattern, it predicts how long your SSD going to live. So, you will have enough time to take a backup and buy a replacement. This tool also gives you feedback and tips on how to optimize your SSD to extend its life.
Download for: Windows
Now you have a list of best software programs that lets you check SSD health. You can keep an eye on the health of SSD installed on your system. Most of the tools are available for Windows, but some of these also work fine with Mac and Linux. You can download one depending on your system configuration.
Advertisement
Summary :
Are you utilizing SSD now? Do you know your SSD performance? In fact, you can conduct a test via professional SSD testing software. This post will show you top 8 SSD health check tools. You can obtain detailed information about these tools in MiniTool.
Quick Navigation :
As it known to all, SSD is taking the place of HDD with its high performance. Therefore, most people utilize SSD as their operating system drive. In fact, as for SSD VS HDD, SSD has more advantages. Though SSDs are fast and more preferable, they are quite fragile.
Based on that fact, you should run SSD health check tool or optimization programs occasionally. By doing so, you can maximize your SSD’s performance and lifespan.
What Does an SSD Health Check Tool Do
Nowadays, there are many SSD testing programs on the market, and they boast different features for managing SSD. To be specific, what does an SSD health check tool do? Well, for most SSD health check tools, they can be used to test the SSD transfer speed, measure SSD performance, optimize SSD, etc. Some of them even allow you to erase SSD securely.
Given to that fact, you’d better read the software’s description carefully to check if it contains the feature you need.
The following will give you more information about what an SSD health check tool performs.
Check SSD Health
The first thing that an SSD health check tool does is to tell you how healthy your SSD is. Some SSD health check tools will show you the current state of your SSD and give you a health status, such as Crystal Disk Info.
While others such as MiniTool Partition Wizard Free Edition can detect how many bad sectors on your SSD, which can indicates your SSD condition. In a word, you can check whether your SSD is in good health easily with these tools.
Optimize SSD Performance
Some SSD tools enable you to carry out garbage collection and other parameters, which can improve the performance of the drive.
Most SSD health check tools allow you to optimize or tune your SSD for different demands such as Intel SSD Toolbox, Samsung Magician, etc. However, you may notice that some utilizes may improve the drive’s performance at the cost of losing some storage capacity.
Ssd Health Check 1.5 Month
Here is a step by step guide to measure disk performance for you.
Test SSD Speed
One of the basic features of SSD health check tools is SSD/Disk benchmark, which can measure your SSD performance by testing the SSD transfer speed. You will know whether the write/read data given by manufacturer is accurate after testing the speed of your SSD.
Besides, you will have a rough understanding of your SSD performance.
Secure Erase SSD
If an SSD includes sensitive information and needs to be wiped, erasing the data on the drive is a wise operation. The problem lies in that many SSD tools delete data by overwriting a drive for many times, causing accessing storage areas failure. For example, blocks can be marked as bad, or overprovisioning and wear leveling blocks.
While some SSD secure erase tools offer access to a hardware-based secure erase routine. During this process, SSD’s controller ensures that all the storage including the areas that cannot be normally and directly accessed can be cleaned entirely.
There are many SSD health check tools available in the market. Which one should you pick? 8 best SSD testers are introduced in this post. You can take them as your reference.
8 Best SSD Health Check Tools
- MiniTool Partition Wizard
- Intel SSD Toolbox
- Samsung Magician
- Crystal Disk Info
- Smartmonotools
- Hard Disk Sentinel
- Toshiba SSD Utility
- SSD Life
Top 8 SSD Health Check Tools
MiniTool Partition Wizard
MiniTool Partition Wizard is a powerful partition manager & SSD health check tool, which can help you format drive, recover missing data, analyze disk usage, migrate OS to SSD/HD, etc. The Disk Benchmark feature enables you to measure disk performance by using variable transfer sizes and test lengths for both sequential and random read/write speeds.
In addition, you can finish the whole operation in a few clicks. With this wonderful SSD benchmark tool, you can test any manufacturer’ RAID controllers, storage controllers, hard drives and SSD drives. However, if the transfer size has a large span, the whole testing process may take you some time.
You can download MiniTool Partition Wizard by clicking the button below.
After downloading and installing MiniTool Partition Wizard, please follow the steps below to perform the disk benchmark operation.
Step 1: Click Launch Application to enter its main interface.
Step 2: Click on Disk Benchmark on the top of the main page.
Step 3: In the pop-up window, you can set HD/SSD disk testing parameters including testing drive, transfer size, queue number, cool down time, thread number, total length, and test mode according to your demand. After that, click on Start to execute the operation.
Step 4: Wait for the completion of operation. Different test settings can take you different time. After the operation finishes, you will get an intuitive table just as the below picture shown.
Just as you see, MiniTool Partition Wizard enables you to perform SSD benchmark with ease. Besides, you can view the results in a direct way. So, please don’t hesitate to download it.
Intel SSD Toolbox
Ssd Health Check 1.5 Inch
Intel SSD Toolbox is a piece of drive management software that enables you to supervise your drive health, estimate the remaining drive life, as well as S.M.A.R.T. attributes. It can run fast and full diagnostic scans to examine the read and write functionality of an Intel SSD.
-image from downloadcenter.intel.com
Besides, it allows you to update firmware on a supported Intel SSD and improve the performance of an Intel SSD by making using of Trim feature. Then, you are able to obtain the best Intel SSD performance, power efficiency and endurance by checking and adjusting system settings.
With Intel SSD Toolbox, you can perform a secure erase of your secondary Intel SSD. That’s all the features of Intel SSD Toolbox.
Samsung Magician
Compared with Intel SSD Toolbox, Samsung Magician is more complicated. That is because it looks more like a management suite than a simple application. Samsung Magician allows you to create profiles, adjust performance ratings, and set the maximum capacity and reliability.
-image from samsung.com
If you want to avoid any incompatibilities with operating system, you can either to update firmware or download the Magician. Actually, optimization and diagnostics are its basic features. /manual-install-keyscape-mac.html. What Samsung Magician offers through its RAID mode is the highlighted point.
The RAID mode can use 1GB of your system’s DRAM as cache for hot data or frequently-accessed data. In this way, the overall performance, especially the read speed will be improved.
More importantly, if you are not satisfied with the diagnostics results and your benchmarks, you can keep optimizing your Samsung SSD for your present OS through the OS optimization feature in Samsung Magician.
Crystal Disk Info
Crystal Disk Info is a piece of open software that can offer you the health and temperature information of your SSD or HDD. It is one of the free tools that have the capability to collect accurate data for both types of storage drives and work with drives from all manufacturers.
-image from crystalmark.info
Ssd Health Check 1.5 Oz
At the same time, general information is also provided for you. Crystal Disk Info allows you to check firmware updates, port details, buffer size, read and write speeds, power consumption and S.M.A.R.T. information. You can test SSD speed through it with ease.
What’s more, you can also use it to do some slight adjustments of power management and notifications. The only disadvantages of Crystal Disk Info are that it won’t work on Linux-based systems and cannot execute firmware updates.
Smartmonotools
The Smartmonotools includes two utility programs (smartctl and smartd), which can help you control and monitor your hard drive. It offers you real time monitoring of your hard disk. What’s more, it will analyze and inform you about possible disk degradation and failure.
Smartmonotools supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and type devices. You can run this disk tool on Mac OS X, Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation, Windows and a Live CD.
Hard Disk Sentinel
Hard Disk Sentinel is a hard disk monitoring tool that supports Windows, Linux and Dos operating system. It is designed to find, diagnose and repair SSD issues. Disk Sentinel is also able to show you SSD health condition. It can scan either an internal or external SSD connected with USB or e-SATA and find potential issues. After that, it will generate reports with the possible fixes to repair the errors.
-image from hdsentinel.com
After you install Hard Disk Sentinel, it will run in the background and check the SSD health condition automatically. If it finds any error, it will inform you immediately. With this SSD monitoring tool, you can test the hard disk’s transfer speed in real time.
By doing so, you will know your disk benchmark, potential hard disk failures, as well as performance degradations.
Toshiba SSD Utility
If you are using OCZ SSD now, Toshiba SSD Utility is possibly the best software that you can utilize regardless of your operating system. You can monitor your SSD in real time and obtain SSD information including SSD health, remaining life, storage space and overall performance very quickly via using Toshiba SSD Utility.
-image from toshiba.com
Additionally, it can also be used as a drive manager and optimization tool. You are able to switch between multiple modes based on your SSD or your rig’s intended use such as gaming, workstation, video editing and so on. By using these preset modes, you can improve the drive’s performance and increase its lifespan in various cases.
SSD Life
SSD Life mainly focuses on SSD health and remaining life instead of other metrics. It has great compatibility with major SSD manufacturers like Apple MacBook Air’s own SSD. It allows you to run diagnostics for SSD health, lifespan and overall performance. SSD Life will tell you accurate results and any important flaws that can influence the remaining lifespan or read/write speeds.
-image from toshiba.com
However, the free trial version only lasts seven days and has limitations on some features. After the trial expiration date reaches, you need to pay for it for later-on using.
Conclusion
Now, all the contents about SSD health check tools have been told to you. It’s your turn to make a choice. You can pick one according to your demand. If you pick MiniTool Partition Wizard, you can check SSD health by following the given steps in the post. While for other SSD health check
tools, you should follow the on-screen steps to finish the operation.
If you have any doubt or advice to MiniTool software, please contact us by writing an email directly via [email protected].
SSD Health Check FAQ
There are 5 signs indicate that your SSD is failing.
- There are errors involving bad blocks.
- Files cannot be read or written.
- The file system needs to be repaired.
- Your computer frequently crashes.
- Your drive becomes read-only.
If these signs appear, it indicates that your SSD is failing and you need to take some measure.